Contact Us

Have an inquiry about service for your BMW, Audi or Porsche? Send us an email using the form to the right and we will be happy to help.

 

4370 Technology Drive
Fremont, CA, 94538
United States

925.426.1361

Enthusiast Powered services for demanding BMW, Audi and Porsche owners.

Dinan Carbon Fiber Cold Air Intake for BMW F80 M3 F82 F83 M4

Dinan

Dinan Carbon Fiber Cold Air Intake for BMW F80 M3 F82 F83 M4

D760-0045_3.jpg
D760-0045_1.jpg
D760-0045_4.jpg
D760-0045_5.jpg
D760-0045_3.jpg
D760-0045_1.jpg
D760-0045_4.jpg
D760-0045_5.jpg

Dinan Carbon Fiber Cold Air Intake for BMW F80 M3 F82 F83 M4

2,120.77

Keeping with the recent Dinan intake tradition the carbon fiber cold air intake for the F8x M3/M4 is beyond reproach. The intake makes the under hood appearance of the newest M's a work of art that could be the focal point of any car show or enthusiasts collection. While beauty is definately a concern; efficiency and maximizing the potential of the stock intake design were the keys to development for the S55 intake. Our sealed system delivers as much cold outside air as possible to the engine by way of less resistance and a straighter freer flowing design which comes with an optimized carbon fiber tube.The increased amount of air feeds into dual larger volume airboxes complete with larger cylindrical filters that elicit a slightly more audible and sporty tone over its stock counterpart.This optimized design yields increased HP/TRQ throughout the power band and shows consistent gains over stage 1 when combined with the stage 2 DINANTRONICS Performance Tuner.

Quantity:
Add To Cart

Labor Hours/Installation Hours 2.00

Emission Status 49 State Emissions Legal. This product is in compliance with U.S. EPA Memorandum 1A, or this product has not been found, nor is believed to be, unlawful for use under the provisions of the Clean Air Act. Currently: This product is legal in California only for racing vehicles, which may never be used upon a highway.

Max HP Gain 14 @ 6000 RPM

Max Torque Gain 21 @ 3000 RPM

Included Notes Air Filter (D401-022), Carbon Tube, Carbon Airbox Lids/MAF Housing, and Hardware Kit.

Benefits of the Dinan Carbon Fiber High Flow Air Intake for the F80 M3 and F82/83 M4:

+ More Power: Max gains of 14 HP @ 6000 RPM and 21 lb-ft of torque @ 3000 RPM  when combined with the Stage 2 DINANTRONICS Performance Tuner and exhaust over stage 1 tuning. 
+ Sportier Sound
+ ~20% Larger volume air boxes that completely seal
+ Optimized carbon fiber intake tube
+ 30% Larger cylindrical air filter
+ Larger MAF Housing
+ Bolt-on installation