Contact Us

Have an inquiry about service for your BMW, Audi or Porsche? Send us an email using the form to the right and we will be happy to help.

 

4370 Technology Drive
Fremont, CA, 94538
United States

925.426.1361

Enthusiast Powered services for demanding BMW, Audi and Porsche owners.

Dinan High Performance Air-to-Water Intercoolers for BMW F10 550i (N63TU)

Dinan

Dinan High Performance Air-to-Water Intercoolers for BMW F10 550i (N63TU)

D330-0017.jpg
D330-0017.jpg

Dinan High Performance Air-to-Water Intercoolers for BMW F10 550i (N63TU)

2,969.49

Special Note: Requires slight Modification of engine cover to accommodate larger intercoolers.

More power, great looks, more consistent performance and no downside by upgrading to the Dinan High Performance Intercoolers for the N63TU V8. Heat is the enemy of horsepower, beat it by replacing the air-to-water intercoolers with larger units from Dinan to reduce the charge air temperature. Add an impressive 23 horsepower and 15 lb-ft of torque when used with the DINANTRONICS Performance Tuner as well as Dinan intake and exhaust. This additional cooling is even more important in hot climates where the inherent power loss is much higher.

The two intercoolers are beautiful and purposeful looking, wrapped in black powder coat and laser engraved with the Dinan logo.

Also Recommended:

DINANTRONICS Performance Tuner (D440-1604-ST1, D440-1604-ST2, D440-1604-ST3):  The DINANTRONICS™ Performance Tuner is a highly engineered and sophisticated piece of computer hardware and software that enhances engine performance, without negating or voiding your new car warranty coverage and without affecting long term reliability or the functionality of on-board diagnostic systems. It is also the only tuning device emissions legal in all 50 states. The ultimate objective of developing this piece of technology was to provide the ability to control every signal entering and exiting the BMW factory Engine Control Unit. These items are unique to Dinan and together they embody the apex of performance engineering in a powerful, reliable, and warrantied package. 

Free Flow Stainless Exhaust (D660-0036 & D660-0036-BLK): An important addition for any enthusiast who wishes their car to sound as good as it performs while also supplying significant power gains itself. These exhausts are dyno tested for maximum exhaust flow with minimum backpressure. The system is designed to provide a more aggressive sound under acceleration, while reducing drone inside the vehicle, thanks to Dinan’s exclusive Butterfly Valve technology.

High Flow Carbon Fiber Cold Air Intake / Strut Tower Brace (D760-0036):  Dinan high flow carbon fiber cold air intakes, like most Dinan products, have a sleek and functional appearance that embodies high performance. The F10 550i cold air intake allows cool outside air to be pushed into the engine via a pair of supplemental carbon fiber intake ducts located at the front of the engine bay while also providing structural stiffness to the strut towers. Dinan engineers have painstakingly developed custom tooling to ensure the entire Dinan cold air intake system is sealed like a factory replacement, thereby preventing hot air from the engine compartment to compromise its effectiveness.  Improved induction airflow offered by Dinan cold air intake systems increase engine performance, even more so if used in combination with other performance enhancing Dinan products.

Quantity:
Add To Cart

Labor Hours/Installation Hours 5.90

Emission Status 50 State Emissions Legal

California Air Resources Board Executive Order Number D-176-46

Max HP Gain 23

Max Torque Gain 15

Peak Horsepower 529

Peak Torque 561

Included Notes Includes silicone hoses, coolant lines, mounting brackets and hardware.