Contact Us

Have an inquiry about service for your BMW, Audi or Porsche? Send us an email using the form to the right and we will be happy to help.

 

4370 Technology Drive
Fremont, CA, 94538
United States

925.426.1361

Enthusiast Powered services for demanding BMW, Audi and Porsche owners.

Dinan High Performance Dual Core Intercooler for BMW F22 M235i F30 F34 335i F32 F36 435i (N55)

Dinan

Dinan High Performance Dual Core Intercooler for BMW F22 M235i F30 F34 335i F32 F36 435i (N55)

D330-0021_1.jpg
D330-0021_2.jpg
D330-0021_3.jpg
D330-0021_4.jpg
D330-0021_5.jpg
D330-0021_6.jpg
D330-0021_1.jpg
D330-0021_2.jpg
D330-0021_3.jpg
D330-0021_4.jpg
D330-0021_5.jpg
D330-0021_6.jpg

Dinan High Performance Dual Core Intercooler for BMW F22 M235i F30 F34 335i F32 F36 435i (N55)

981.59

Special Note: Does not fit vehicles equipped with Active Cruise Control or the F23 / F33 chassis (convertibles). 

Labor times depending on application and the amount of bumper modification that is necessary. Labor times range from as little as 2 hours to 4.5 hours. 

For F30 335i applications with M-Tech bumpers please review optional hardware kit D333-0025 for optimal appearance.

Greater power gains are achieved with a larger high performance intercooler. The Dinan dual core intercooler provides a 240% increase in face area along with an equally impressive increase in volume, substantially reducing the pressure drop to 0.8 psi, as well as providing for more efficient heat exchange and more consistent output power. Dinan's unique dual core design allows 2 separate cores to be working in conjunction with one another at all times. This doubling of resources is directly responsible for a 60% improvement in the delta from charge air temperature to ambient temperature (See diagrams below). "Cool down" time is also reduced, enabling the cars to produce full power under varying driving conditions such as stop and go traffic. This leaves the chances of being susceptible to heat soak nearly a thing of the past. 

The system has been engineered to be as direct a replacement as possible to the stock unit, requiring only minor modifications for a clean, factory-like installation. The increased thermal efficiency provided by the Dinan dual core intercooler will also enhance turbocharger reliability in addition to overall power. On a stock vehicle power gains can be had from 4000 RPM and beyond (when the car is in boost).  In order to achieve the best performance the intercooler should be paired with the Stage 3 DINANTRONICS Performance Tuner as it provides optimization of the intercooler. In particular it extends the power band to be more robust and powerful from 4000 RPM to redline whereas without tuning the bulk of the gains are from 6000 RPM to redline.

Quantity:
Add To Cart

Labor Hours/Installation Hours 4.50

Emission Status 50 State Emissions Legal

California Air Resources Board Executive Order Number D-176-46

Max HP Gain 15 @ 6250 RPM

Max Torque Gain 13 @ 6250 RPM

Included Notes Dinan N55 High Performance Dual Core Intercooler.

Benefits of the Dinan High Performance Dual Core Intercooler:

+ Max gains of 15 HP and 13 lb-ft of torque @ 6250 RPM (greater gains and a wider power band can be achieved when paired with stage 3 DINANTRONICS)
Face area  240% larger than the stock intercooler setup for maximum cooling efficiency to deter heat soak. 
+ Charge Air Pressure drop: 0.80 PSI (25% improvement over stock)
+ Charge Air Temperature drop: 155º F (11% improvement over stock)
+ Charge Air Temperature / Ambient Temperature Delta: 18º F @ 6250 RPM (60% improvement over stock)